Players Circle

XPND Pedal Power System

The XPND Pedal Power System is an all-in-one, customizable solution for powering your pedals with clean, quiet energy. Whether you play in a club, at a studio, or off the grid, XPND adapts to your rig with a rechargeable 10,000mAh battery, USB-C wall power, adjustable plug spacing, and optional accessories to eliminate noise and expand your setup.

Power, Anywhere

XPND is designed to go where you go, with a rechargeable battery that delivers over 10 hours of clean power to average-sized pedalboards (8–10 pedals, ~350mA total). The digital display on the Power Cell keeps you aware of your battery status, and the USB-C wall adapter lets you swap to plug-in power on the fly. NOTE: The Backup Power Cell is a component of the XPND Power System and cannot be used on it's own. The complete system is needed to provide power to your board.

Built For Flexibility

XPND power tools are made to fit your board, no matter how often it changes.

FeatureWhy it matters
Rechargeable Power Cell10,000mAh battery gives 10+ hours of runtime
Gateway HubProvides stable 9V output with noise filtering
Customizable Daisy ChainSlide or remove plug. No cutters, no waste
Self-Healing CableAutomatically seals where unused plugs are removed
DIY Kit SupportBuild your own cable lengths for tighter layouts
USB-C Wall PowerEasily switch to AC power when battery runs low
Noise IsolatorGalvanic isolation removes hum from problem pedals
Universal MountingWorks with XPND and most other pedalboards

XPND vs. Traditional Power Supplies

XPND power tools are made to fit your board, no matter how often it changes.

FeatureXPND Pedal PowerTraditional Supplies
Power SourceRechargeable + USB-CWall only
Cable FlexibilitySlide + Remove PlugsFixed plug spacing
Noise HandlingBuilt-in isolator supportOften needs full isolation
ExpandabilityAdd plugs, cables, batteryOften requires full new unit
MountingFits any boardMay require drilling
CustomizationDIY and prebuilt kitsUsually prebuilt only

A Modular Ecosystem

Each component of the XPND Power lineup works together—or on its own—to give you more control over your board’s layout, sound, and power needs.

Pedal Power Battery Kit

Rechargeable battery, Gateway Hub, and daisy chain for powering up to 8 pedals, with a maximum output of 1500mA.

Backup Battery Cell

Portable 10,000mAh backup battery with digital readout.

Noise Isolator

Eliminates hum when mixing analog and digital pedals on the same chain.

Adjustable Daisy Chain

Custom spacing, removable plugs, self-healing cable.

DIY Power Cable Kit

Create your own custom-length runs for isolated power setups.

Power Plugs

Add extra male or female plugs to expand your system.

Power Cable

10-foot cable for additional DIY or daisy chain setups.

You must be a Players Circle member to take this quiz and earn 50 points!

Sign Up Log In & Take Quiz